RBI/2012-13/389
UBD.BPD. (AD) Cir.No.2 /13.05.000/2012-13
January 22, 2013
Chief Executive Officer
Scheduled Primary (Urban) Co-operative Banks
(holding AD Category I licence)
Dear Sir/Madam
Interest Rates on Rupee Export Credit -UCBs
Please refer to circular UBD.BPD.(AD) Cir. No.8 /13.05.000/2011-12 dated June 26, 2012 extending the interest subvention on rupee export credit on specified export sectors till March 31, 2013.
2. The Government of India has decided to widen the scheme to include certain items covering the Engineering Sectors. The Scheme will be made available to the Engineering Sector on pre and post shipment export credit on the same terms and conditions as available to other sectors. A list of 134 tariff lines of Engineering products approved for inclusion in Interest Subvention for the period January 1, 2013 to March 31, 2013 is enclosed to this circular (Annex I).
3. Further it has also been decided to extend the interest subvention of 2% on rupee export credit on specified export sectors from April 1, 2013 to March 31, 2014. Accordingly, the interest subvention on pre-shipment and post-shipment rupee export credit is extended from April 1, 2013 to March 31, 2014 on the same terms and conditions as mentioned in our circular dated June 26, 2012 for the following sectors.
(i) Handicraft
(ii) Carpets
(iii) Handlooms
(iv) Small and Medium Enterprises (SMEs) (as defined in Annex II)
(v) Readymade Garments
(vi) Processed Agriculture Products
(vii) Sport Goods
(viii) Toys
(ix) 134 Tariff lines on Engineering Products (Annex I)
4. A Directive No.UBD.BPD.Dir. (Exp). No.9/13.05.000/2012-13 dated January 21, 2013, issued in this regard, is enclosed.
5. Claims for re-imbursement of subvention amount may be submitted to the Chief General Manager-in-Charge, Urban Banks Department, Reserve Bank of India, Central Office, Garment House, Worli, Mumbai 400 018 on a quarterly basis starting from quarter ended June 30, 2013 in the format as per Annex III. The amount of subvention will be calculated on the outstanding amount of rupee export credit from the date of disbursement up to the date of repayment or up to the date on which the outstanding export credit becomes overdue, whichever is earlier. The claims should be accompanied by an External Auditor's Certificate certifying that the claim for subvention of Rs. ………….. for the period ……………. (specify the quarter) is true and correct. Settlement of the claim will be done only on receipt of this certificate.
Yours faithfully
(A. Udgata)
Chief General Manager -in-Charge
Encl: as above
Annex I
Tariff Lines of Engineering Products approved for Inclusion for Interest Subvention |
||
Sl. No. |
ITC (HS) |
Description |
1 |
7301 |
SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES |
2 |
7309 |
RESERVRS & CONTAINRS FR ANY MATRL(OTHR THNCMPRSD / LIQD GAS)OF IRN / STL-CAPCTY>300 LTR NOT FITD WITH MECHNCL / THERMAL EQUIPMEN |
3 |
7310 |
TANKS, DRUMS ETC & SMLR CONTNRS FOR MATERLS (OTHR THN CMPRSD / LQFD GAS)-CAPCTY<=300LTRNOT FITTED WTH MECHNCL OR THERML EQ |
4 |
7311 |
CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS, OF IRON OR STEEL |
5 |
7314 |
CLOTH (INCLUDING ENDLESS BANDS), GRILL, NETTING AND FENCING, OF IRON OR STEEL WIRE; EXPANDED METAL OF |
6 |
7315 |
CHAIN AND PARTS THEREOF, OF IRON OR STEEL |
7 |
7316 |
ANCHORS, GRAPNELS AND PARTS THEREOF, OF IRON OR STEEL |
8 |
7317 |
NAILS, TACKS, DRAWING PINS, CORRUGATED NAILS, |
9 |
7318 |
SCRWES, BOLTS, NUTS, COACHSCREWS, SCREW HOOKS RIVETS, COTTERS, COTTER-PINS, WASHERS (INCL SPRING WASHERS) & SMLR ARTICLES OF IRN / STL |
10 |
7319 |
SEWNG, KNITING NEEDLS,BODKINS,CROCHET BOOKSETC. & SMLR ARTCLS FOR USE IN HAND,OF IRN / STL;SAFETY PINS & OTHR PINS NES / INCLU |
11 |
7320 |
SPRINGS AND LEAVES FOR SPRINGS, OF IRON OR STEEL |
12 |
7321 |
STOVS, RANGS, GRATS, COOKRS, BARBECUS, BRAZIRS GAS-RINGS, PLATE WARMRS & SMLR NON- ELECTRICDOMESTC APPLIANCES & ITS PRTS OF I |
13 |
7322 |
RADTRS FR CNTRL HTNG & ITS PRTS OF IRN / STLAIR HTRS & HT AIR DSTRBTRS NT ELCTRCLY HTD,INCORPRTNG MOTOR DRIVN FAN & ITS PR |
14 |
7323 |
TABLE KITCHN OR OTHR DOMESTIC ARTCLS & ITSPARTS OF IRN / STL; IRN OR STL WOOL; SCOURERS OR POLISHNG PADS,GLOVS & LIKE OF |
15 |
7324 |
SANITARY WARE AND PARTS THEREOF, OF IRON OR STEEL |
16 |
7408 |
COPPER WIRE |
17 |
7409 |
COPPER PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.12.5 MM |
18 |
7410 |
COPPER FOIL (W/N PRINTD OR BACKD WTH PAPR, PAPRBORD, PLSTCS OR SMLR BACKING MATERLS) OF A THICKNESS (EXCL BACKING)<=0.15 MM |
19 |
7411 |
COPPER TUBES AND PIPES |
20 |
7412 |
COPR TUBE / PIPE FITNG (CUPLNGS, ELBOWS, SLEVS) |
21 |
7413 |
STRANDED WIRE, CABLES, PLATED BANDS AND THE LIKE, OF COPPER, NOT ELECTRICALLY INSULATED |
22 |
7415 |
NAILS, TACKS, DRAWING PINS, STAPLES (OTHER THAN THOSE OF HEADING 8305) AND SIMILAR ARTICLES, OF COPPER OR OF IRON OR STEEL |
23 |
7418 |
TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF COPPER; POT SCOURERS AND SCOURING OR POLISHING PADS, G |
24 |
7419 |
OTHER ARTICLES OF COPPER |
25 |
7607 |
ALMNM FOIL(W/N PRNTD / BCKD WTH PAPR PAPRBOARD-PLSTCS ETC.) OF THCKNS (EXCL ANY BCKNG) NT EXCDNG 0.2 MM |
26 |
7611 |
ALMNM RSVRS, TNKS, VATS ETC. FR ANY MATRL (EXCL CMPRSSD GAS) OF CPCTY>300L,W/N LND HT-INSLTD,BT NT FTD WTH MCHNL / THRML EQPMNT |
27 |
7612 |
ALMNM CSKS, DRMS, CANS ETC(INCL CLPSBL TBLR CONTNRS) FR ANY MTRL(EXCL GAS), OF<=300L,W/ NW/N LIND BUT NT FTD WTH MHCHNCL / THRML EQU |
28 |
7613 |
ALMNM CONTAINERS FOR COMPRESSED / LQFD GAS |
29 |
7614 |
STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF ALUMINIUM, NOT ELECTRICALLY INSULATED |
30 |
7615 |
TABL,KTCHN / OTHR HOUSLD ARTCLS & PRTS OF ALMNM, POT SCOURS & SCOURNG / POLSHNG PADS GLOVS & TH LIKE, SNTRY WRE & PRTS OF ALMNM |
31 |
8201 |
HND TOOLS LIKE SPADES, SHOVELS, HOES, FORKS AXES & SIMLR SEWING TOOLS SECATRS-ANY KINDKNIVES, HEDGE SHEARS ETC USD IN AGR / FORSTRY |
32 |
8202 |
HND SAWS; BLDES FOR SAWS OF ALL KINDS (INCLD SLITNG SLOTNG OR TOTHLES SAW BLADES |
33 |
8203 |
FILES, RASPS, PLIERS (INCLUDING CUTTING PLIERS), PINCERS, TWEEZERS, METAL CUTTING SHEARS, PIPE-CUTTERS, BOLT CROPPERS |
34 |
8204 |
HND OPRTED SPANERS & WRENCHS (INCLD TORQUE METER WRENCHS BUT NT TAP WRENCHS); INTER CHANGBLE SPANER SOCKETS WTH HANDLE OR NOT |
35 |
8205 |
HND TOOLS (INCLD GLAZIERS'DIAMONDS) N.E.S. BLOW LAMPS; VICES, CLAMPS, OTHR THN ACSORS & PRTS OF MCHN TLS; ANVILS; PRTBLE FORGES ETC |
36 |
8206 |
TOOLS OF TWO OR MORE OF THE HEADINGS 8202 TO 8205, PUT UP IN SETS FOR RETAIL SALE |
37 |
8207 |
INTRCHANGBL TOOLS FOR HND TOOLS W/N POWR OPERATD OR FOR MACHIN TOOL(E.G. FOR PRESNG STAMPING ETC.) DIES FR DRILNG / BORNG TOOLS |
38 |
8208 |
KNIVES AND CUTTING BLADES, FOR MACHINES OR FOR MECHANICAL APPLIANCES |
39 |
8209 |
PLTES STIKS TIPS & LIKE FOR TLS, UNMOUNTD OF CERMETS |
40 |
8210 |
HND-OPRETD MCHNCL APPLNCS WEIGHNG <=10KG. USED IN PRPRNG,CONDITNG, SERVNG FOOD / DRINK |
41 |
8211 |
KNIVS WTH CUTNG BLADES, SERATD OR NT (INCL PRUNING KNIVES) OTHER THAN KNIVES OF HDG NO.8208 & BLADES THEREFOR |
42 |
8212 |
RAZORS AND RAZOR BLADES (INCLUDING RAZOR BLADE BLANKS IN STRIPS) |
43 |
8213 |
SCISORS TAILR'S SHEARS & SIMLR SHEARS & BLADES THEREFOR |
44 |
8214 |
OTHER ARTICLES OF CUTLERY (FOR EXAMPLE, HAIR CLIPPERS, BUTCHERS OR KITCHEN CLEAVERS, CHOPPERS AND MINCING KNIVES, PAP |
45 |
8215 |
SPOONS, FORKS, LADLES, SKIMMERS, CAKE- SERVERS, FISHKNIVES, BUTTER-KNIVES, SUGAR TONGS AND SIMILAR KITCHEN OR TABLEWARE |
46 |
8402 |
STM / OTHR VAPR GNRTNG BOILRS (EXCL CNTRL HTNG HOT WATER BOILRS CPBL ALSO OF PRDCNG LOW PRESSURE STEAM);SUPER-HEATD WTR BOILRS |
47 |
8403 |
CNTRL HTNG BOILRS EXCL OF HDG NO.8402 |
48 |
8404 |
AXLRY PLNT,USD WTH BOILRS OF HDG NO.8402 / 8403(E.G. ECNMSRS, SUPR-HTRS, SOOT-RMVR, GAS-RCVR); CNDNSR FR STM / OTHR VPR POWR UNIT |
49 |
8405 |
PRDCR / WTR GAS GNRTRS, ACETLEN GAS GNRTRS & SMLR WTR PRCS GNRTRS, W/N WTH THEIR PURIFRS |
50 |
8406 |
STEAM TURBINES AND OTHER VAPOUR TURBINES |
51 |
8410 |
HYDRAULIC TURBINES, WATER WHEELS, ANDREGULATORS THEREFOR |
52 |
8411 |
TURBO-JETS, TURBO-PROPELLERS AND OTHER GAS TURBINES |
53 |
8415 |
AIRCONDTNG MCHNS, CMPRSNG MOTR-DRVN FAN & ELMNTS FR CHNG TMPRTR & HUMDTY, INCL THOSE MCHNS IN WHCH HUMDTY CANNT BE SPRTLY RGLT |
54 |
8416 |
FURNC BURNRS FR LIQUID FUEL,FR PULVRSD SOLID FUEL / FR GAS; MCHNCL STOKRS, MCHNCL GRTS, MCHNCL ASH DISCHRGS & SMLR APPLNCS |
55 |
8417 |
INDUSTRIAL OR LABORATORY FURNACES AND OVENS, INCLUDING INCINERATORS, NON- ELECTRIC |
56 |
8418 |
RFRGRTRS, FRZRS & OTHR RFRGRTNG / FRZNG EQPMNT, ELCTRC / OTHR;HT PUMPS EXCL AIR CONDTNG MCHNS OF HDG NO.8415 |
57 |
8419 |
MCHNRY, PLNT / LABORATORY EQPMNT, W/N ELCTRCLYHEATD, FR HEATNG, COOKNG, ETC,EXCL MCHNRY FR DOMSTC PURPS; STORG WTR HEATRS, NON-ELCTRC |
58 |
8420 |
CALENDERING OR OTHER ROLLING MACHINES, OTHER THAN FOR METALS OR GLASS, AND CYLINDERS THEREFOR |
59 |
8421 |
CENTRIFUGES, INCLUDING CENTRIFUGAL DRYERS; FILTERING OR PURIFYING MACHINERY AND APPARATUS, FOR LIQUIDS OR GASES |
60 |
8422 |
DISH WASHING MACHINES; MACHINERY FOR CLEANING OR DRYING BOTTLES OR OTHER CONTAINERS; MACHINERY FOR FILLING, CLOSING |
61 |
8423 |
WEIGHING MACHINERY (EXCLUDING BALANCES OF A SENSITIVITY OF 5 CENTIGRAMS OR BETTER), INCLUDING WEIGHT OPERATED COUNTING OR CHEC |
62 |
8424 |
MCHNCL APPLNCS (W/N HND-OPRTD) FR PRJCTNG, DSPRSNG LQDS / PWDR; FIRE EXTNGSHR, W/N CHRGD; SPRY GUNS & LIKE; STM / SND BLSTNG & SMLR MCHNS |
63 |
8425 |
PULLEY TACKLE AND HOISTS OTHER THAN SKIP HOISTS; |
64 |
8432 |
AGRCLTRL, HRTCLTRL / FRSTRY MCHNRY FR SOIL PRPRTION / CLTVTN; LAWN / SPRTS-GRND RLLRS |
65 |
8433 |
HRVSTNG / THRSHNG MCHNRY INCL STRAW / FODR BLRS; GRASS MOWRS; MCHNS FR CLNG, SRTNG EGGS, FRUIT / OTHR SMLR PRDC EXCL MCHNRY OF 8437 |
66 |
8434 |
MILKING MACHINES AND DAIRY MACHINERY |
67 |
8435 |
PRSSES, CRSHRS & SMLR, MCHNRY USD IN MNFCTR OF WINE, CIDER, FRUIT JUICES / SMLR BVRGS |
68 |
8436 |
OTHR AGRCLTRL, HRTCLTRL, POLTRY / BEE-KEEPNG MCHNRY INCL GRMNTN PLNT FTTD WTH MCHNCL / THRML EQPMNT; POLTRY INCUBTRS & BROODRS |
69 |
8437 |
MCHN FR CLNG, SRTNG SEED, GRAIN / LGMNS VGTBL; MCHNRY FOR MLNG INDSTRY / FR WRKNG OF CRL / DRIED LGMNS VEGTBLS, EXCL FARM-TYPE MCHNRY |
70 |
8438 |
MCHNRY, N.E.S., FR INDSTRL PRPTN / MNFCTR OF FOOD / DRNK, EXCL MCHNRY FR EXTRCTN / PRPRTN OFANML / FXD VGTBL FATS / OILS |
71 |
8439 |
MCHNRY FR MKNG PULP OF FIBROUS CELLULOSIC MTRL / FR MKNG / FNSHNG PAPER / PAPERBOARD |
72 |
8440 |
BOOK-BINDING MACHINERY, INCLUDING BOOK-SEWING MACHINES |
73 |
8441 |
OTHER MACHINERY FOR MAKING UP PAPER PULP, PAPER OR PAPERBOARD, INCLUDING CUTTING MACHINES OF ALL KINDS |
74 |
8442 |
MCHNRY, APPRTS & EQPMNT (EXCL OF 8456 TO 8465), FR TYPE-FOUNDNG / TYPE-STTNG, FR PRPRNG PRNTNG BLKS, PLTS ETC; BLKS FR PRNTNG |
75 |
8443 |
PRINTNG MACHNRY, INCL INK-JET PRINTNG MCHNSEXCL HDNG. NO 8471; MCHNS FR USES ANCILARY TO PRINTNG. |
76 |
8444 |
MCHNS FR EXTRUDING, DRAWING, TEXTURING OR CUTTING MAN-MADE TEXTILE MATERIALS |
77 |
8445 |
MCHNS FR PRPRNG TXTL FBRS; SPNG, TWSTNG ETC MCHNRY FR PRDCNG TXTL YRNS; MCHNS FR PRPRNGTXTL YRNS FR USE ON MCHNS OF 8446/8447 |
78 |
8446 |
WEAVING MACHINES (LOOMS) |
79 |
8447 |
KNTNG MCHNS, STCH-BNDNG MCHNS & MCHNS FR MKNG GMPD YRN, TULLE, LACE, EMBRDRY,TRMMNG, BRAID / NET & MCHNS FR TFTNG |
80 |
8448 |
AUXLRY MCHNRY USD WTH MCHNS OF HDG 8444, 8445,8446 / 8447; PRTS & ACCSSRS USD WTH THIS HDG / OF HDG 8444,8445,8446 / 8447 |
81 |
8449 |
MCHNRY FR MNFCTR OF FINSHNG OF FELT OR NON-WOVNS IN PIECE / IN SHAPS, INCL MCHNRY FRMKNG FELT HATS, BLOCKS FR MKNG HATS |
82 |
8450 |
HOUSEHOLD OR LAUNDRY-TYPE WASHING MACHINES, INCLUDING MACHINES WHICH BOTH WASH AND DRY |
83 |
8451 |
0THER PARTS OF HOUSEHOLD LAUNDRY TYPE MCHNETC & MCHNS FR APPLYNG PST TO BASE FBRC ETC; MCHNS FR RLNG, UNRLNG, FLDNG / CTTNG TXTL FBRC |
84 |
8452 |
SEWNG MCHNS, EXCL BOOK-SEWNG MCHNS OF HDG NO 8440; FURNTR, BASES & COVRS SPCLY DSGND FOR SEWNG MCHNS; SEWNG MCHNS NEDLS |
85 |
8453 |
MCHNRY FR PREPARING,TANG / WRKNG HIDES, SKINS / LTHR / FR MKNG / REPAIRNG FOOTWEAR / OTHR ARTCLS OF HIDES, SKINS ETC EXCL SEWNG MCHNS |
86 |
8454 |
CNVRTRS, LADLS, INGOT MOULDS & CASTNG MCHNS USD IN METALLURGY / IN METAL FOUNDRIES |
87 |
8455 |
METAL-ROLLING MILLS AND ROLLS THEREFOR |
88 |
8456 |
MCHN-TOLLS FR WRKNG ANY MATRL BY RMVL OF MATRL, BY LASR / OTHR LIGHT / PHOTN BEAM, ULTRSONC ELCTRO-DSCHRG, ELCTRO-CHMCL,ETC |
89 |
8457 |
MACHINING CENTRES, UNIT CONSTRUCTION MACHINES (SINGLE STATION) AND MULTI- STATION TRANSFER MACHINES FOR WORKING META |
90 |
8458 |
LATHES (INCLUDING TURNING CENTRES) FOR REMOVING METAL |
91 |
8459 |
MCHN-TOOLS (INCL WAY-TYPE UNIT HEAD MCHNS) FR DRLLNG, BORNG, MLLNG, THRDNG / TAPNG BY REMOVNG MTL, EXCL LATHS OF HDG NO. 8458 |
92 |
8460 |
MCHN-TOOLS FR DBURNGS, SHRPNG, GRNDNG, HNING POLSHNG / OTHRWS FINSNG MTL ETC, CRMTS BY GRNDNG STONS, GEAR GRNDNG MCHNS OF HDG NO.8 |
93 |
8461 |
MCHN-TOOLS FR PLNING, SHAPNG, SLOTNG, BROCHNG GEAR CUTNG / GRNDNG / FINSNG ETC WRKNG BY REMOVNG MTL, CERMETS N.E.S. / INCLUDED |
94 |
8462 |
MCHN-TLS FR WRKNG MTL BY FORGN, HAMMRNG / DIE-STMPNG; FR WRKG MTL BY BENDNG, FOLDNG, ETC; PRSSES FR WRKNG MTL / MTL CRBDS, NES |
95 |
8463 |
OTHER MACHINE-TOOLS FOR WORKING METAL, OR CERMETS, WITHOUT REMOVING MATERIAL |
96 |
8464 |
MCHN-TOOLS FR WRKNG STONE, CERAMICS, CONCRETE, ASBESTOS-CEMENT / LIKE MNRL MTRLS OR FR COLD WRKNG GLASS |
97 |
8465 |
MCHN-TOOLS (INCL MCHNS FR NAILNG, STAPLNG, GLUENG / OTHRWS ASSEMBLNG) FR WRKNG WOOD, CORK, BONE, HARD RUBBER, HARD PLASTICS ETC |
98 |
8466 |
PRTS & ACCSSRS SUITBL FR USE WTH MCHNS OF HDG NOS8456 TO 8465,INCL WRK / TOOL HOLDRS, SLF-OPENG DIEHEADS, ETC; TOOL HOLDRS |
99 |
8467 |
TOOLS FOR WORKING IN THE HAND, PNEUMATIC, HYDRAULIC OR WITH SELF-CONTAINED ELECTRIC OR NON-ELECTRIC MOTOR |
100 |
8468 |
MCHNRY & APPRTS FR SOLDRNG, BRAZNG / WELDNG, W/N CPBL OF CUTNG, EXCL OF HDG NO. 8515; GAS-OPERTD SURFACE TAMPRN MCHNS & APPLNCS |
101 |
8474 |
MCHNRY FR SORTNG, SCRENG, SEPARTNG, WASHNG, CRSHNG ETC OF MNRL SUBSTNCS, IN SOLID FORM MCHNS FR SHPNG MNRL FUEL & FRMNG MLDS OF |
102 |
8475 |
MCHNS FR ASSMBLNC ELCTRC / ELCTRNC LAMPS, TUBES / VALVE / FLASH-BULBS, IN GLASS ENVELOPS, MCHNS FR MNFCTRNG / HT WRKNG GLASS / GLASSWAR |
103 |
8476 |
AUTOMTC GOODS-VENDNG MCHNS (E.G. POSTAGE STAMP, CIGARETTE, FOOD / BEVERAGE MCHNS), INCL MONEY CHNGNG MCHNS |
104 |
8480 |
MOULDING BOXES FOR METAL FOUNDRY; MOULD BASES; MOULDING PATTERNS; MOULDS FOR METAL (OTHER THAN INGOT MOULDS), METAL CARBIDES |
105 |
8504 |
ELECTRICAL TRANSFORMERS, STATIC CONVERTERS (FOR EXAMPLE, RECTIFIERS) AND INDUCTORS |
106 |
8505 |
ELCTRO-MGNT; PRMNENT MGNTS & ARTCLS TO MAKEPRMNENT MGNT; ELCTRO MGNTC / PRMNENT DEVICS ELCTRO MGNTC CLTCHS,BRKS & LFTNGH |
107 |
8507 |
ELCTRC ACCUMLTRS, INCL SEPARATORS THEREFOR W/N RECTANGULAR (INCL SQ) |
108 |
8508 |
VACUUM CLEANERS |
109 |
8509 |
ELCTRO-MECHNCL DOMESTIC APPLIANCES WTH SELF-CONTAINED ELCTRC MOTOR |
110 |
8510 |
SHAVERS, HAIR CLIPPERS AND HAIR-REMOVING APPLIANCES, WITH SELF-CONTAINED ELECTRIC MOTOR |
111 |
8514 |
INDSTRL / LABORATORY ELCTRC (INCL INDUCTN / DIELCTRC) FURNACES ETC; OTHR INDSTRL / LABORATORY INDUCTN / DIELCTRC HTNG EQPMNTS |
112 |
8515 |
ELCTR (INCL ELCTACLLY HTD GAS) LASER / OTHR LIGHT / PHOTON BEAM ETC, BRZNG / SLDRNG MCHNS ETC FR HOT SPRYNG OF MTLS / CERMETS |
113 |
8516 |
ELCTRC WTR & IMRSN HTR; ELCTRC SPACES & HTNG APRTS; ELCTRO THRMIC HAIR DRSSNG APRTS & HND DRYRS; SMLR ELCTRC APLNCS FR DMSTC USE |
114 |
8518 |
MCROPHONES & STNDS THRFR; LOUDSPKR, W/N MNTD HEADPHONE, EARPHONE & COMBND MCROPHONE / SPKRSETS; AUDIO FRQNCY AMPLFYR; SND AMPLFYR SETS |
115 |
8519 |
TURNTABLES (RECORDDECKS) RECORD-PLAYERS CASSETTE PLAYERS ETC NT INCORPORATING A SOUND RECORDING DEVICE |
116 |
8521 |
VIDEO RECORDING OR REPRODUCING APPARATUS, WHETHER OR NOT INCORPORATING A VIDEO TUNER |
117 |
8522 |
PRTS & ACSSRS OF APPRTS OF HDGS NOS. 8519 TO 8521 |
118 |
8525 |
TRNSMISN APARATS FR RADIO, TELEPHNY ETC W/N INCRPRTNG RECEPTION APPRTS / SOUND RECORDING / REPRDCNG APPRTS; TV CAMERAS ETC |
119 |
8526 |
RADAR APPARATUS, RADIO NAVIGATIONAL AID APPARATUS AND RADIO REMOTE CONTROL APPARATUS |
120 |
8527 |
RECEPTION APPARATUS FOR RADIO-BROADCASTING WHETHER OR NOT COMBINED, IN THE SAME HOUSING, WITH SOUND RECORDING OR REPRODUCI |
121 |
8528 |
RECEPTION APARATUS,WH / NOT INCORPRTNG RADIOBRODCST RECIVRS / SOUND / VIDEO RCORDNG / REPRODUCING APARATUS, VIDEO MONITORS ETC |
122 |
8529 |
PRTS SUITBL FR USE SOLELY / PRNCPLLY WTH APPRTS OF HDGS NOS 8525 TO 8528 |
123 |
8531 |
ELCTRC SOUND / VISUAL SIGNLLNG APPRTS (E.G. BELLS SIRENS ETC.) OTHR THN THOSE OF HDG NO.8512/8530 |
124 |
8532 |
ELCTRCL CAPACITORS FIXD, VARIABLE / ADJUSTABLE (PRE-SET) |
125 |
8533 |
ELCTRCL RESISTORS (INCL RHEOSTATS & POTENTIOMETERS) OTHR THN HTNG RESISTORS |
126 |
8535 |
ELCTRCL APPRTS FR SWTCHNG / PROTCTNG ELCTRCLCIRCUITS ETC.(E.G. SWTCHS, FUSES, LIGHTNING ARRESTERS ETC) FR A VLTG EXCDG 1000 VOLTS |
127 |
8536 |
ELCTRCLS APPRTS FR SWTCHNG / PRTCTNG ELCTRCLCIRCUITS ETC. (E.G. SWTCHS RELAYS ETC.) FOR A VOLTAGE NOT EXCDG 1000 VOLTS |
128 |
8537 |
BORDS PANLS ETC EQUIPD WTH TWO OR MORE APPRTS OF HDG 8535 / 8536,INCL THOSE INCORPRTNG INSTRMNTS / APPRTS OF CH 90 |
129 |
8538 |
PRTS SUITBL FR USE SOLELY / PRINCIPALLY WTH THE APPRTS OF HDG NO.8535,8536 / 8537 |
130 |
8539 |
ELECTRIC FILAMENT OR DISCHARGE LAMPS, INCLUDING SEALED BEAM LAMP UNITS AND ULTRA-VIOLET OR INFRA-RED LAMPS; ARC-LAMPS |
131 |
8540 |
THERMIONIC COLD CATHODE / PHOTO-CATHODE VALVES & TUBES (E.G. VACUUM / VAPOUR / GAS FILLED VALVES TUBES ETC.) |
132 |
8541 |
DIODES, TRANSISTORS AND SIMILAR SEMICONDUCTOR DEVICES; PHOTOSENSITIVE SEMICONDUCTOR DEVICES, INCLUDING PHOTOVOLT |
133 |
8542 |
ELCTRNC INTEGRTD CIRCUITS & MICRO-ASSMBLS |
134 |
8543 |
ELCTRCL MCHNS & APPRTS, HVNG INDIVIDUAL FNCTNS N.E.S. IN THIS CHAPTER |
Annex -II
Definition of SME
Enterprises engaged in the manufacture or production, processing or preservation of goods as specified below:
(i) A micro enterprise is an enterprise where investment in plant and machinery (original cost excluding land and building and the items specified by the Ministry of Small Scale Industries vide its notification No. S.O.1722 (E) dated October 5, 2006) does not exceed Rs. 25 lakh;
(ii) A small enterprise is an enterprise where the investment in plant and machinery (original cost excluding land and building and the items specified by the Ministry of Small Scale Industries vide its notification No. S.O.1722 (E) dated October 5, 2006) is more than Rs. 25 lakh but does not exceed Rs. 5 crore; and
(iii) A medium enterprise is an enterprise where the investment in plant and machinery (original cost excluding land and building and the items specified by the Ministry of Small Scale Industries vide its notification No. S.O.1722 (E) dated October 5, 2006) is more than Rs. 5 crore but does not exceed Rs. 10 crore.
Annex III
Rupee Export Credit for the period from ________ to _________
(to be submitted quarterly starting from quarter ended June 30, 2013)
(Pre-shipment Export Credit and
Post -shipment Export Credit)
Category of Exporters |
Total Rupee Export Credit granted at 2% less than the rates charged for other categories of Exporters |
Amount of Subvention Claimed |
(1) |
(2) |
(3) |
(i) Handicrafts |
||
(ii) Carpet |
||
(iii) Handlooms |
||
(iv) Small & Medium Enterprises (SME) (as defined in Annex II of circular No. dated January, 2013) |
||
(v) Readymade Garments |
||
(vi) Processed Agriculture Products |
||
(vii) Sport Goods |
||
(viii) Toys |
||
(ix) 134 Tariff lines on Engineering Products (as defined in Annex I of |
||
Total |
NB: Amount of subvention should be rounded off to the nearest rupees.
We certify having charged interest on the above loans at interest rates that are 2% below those charged for other categories of exporters by way of export credit to the eligible exporters as stated in the RBI circular No. UBD.BPD.PCB.Cir. No.___/13.05.000/2012-13 dated January____, 2013 during the period ________to ___________.
Dated : _____________
Name and Designation of Authorised Signatory
UBD.BPD.Dir. (Exp).No. 9 /13.05.000/2012-13
January 21, 2013
Interest Rates on Rupee Export Credit
In exercise of the powers conferred by Section 21 and 35A of the Banking Regulation Act,1949 read with Section 56, and in partial modification of its Directive UBD.BPD.Dir.(Exp).No.4/13.05.000/2011-12 dated June 21, 2012, the Reserve Bank of India being satisfied that it is necessary and expedient in the public interest so to do, hereby directs that, the Interest Subvention Scheme on Rupee Export Credit has been widened to include certain items (mentioned in Annex I) covering the Engineering Sectors on pre and post shipment export credit on the same terms and conditions as available to other sectors for the period January 1, 2013 to March 31, 2013.
Further, it is also directed that with effect from April 01, 2013 up to March 31, 2014 scheduled primary (urban) co-operative banks holding AD category I licence will charge, for specified export sectors, interest at 2 percentage point below the interest rates charged from exporters in other categories of export sector, on the outstanding amount of rupee export credit from the date of disbursement up to the date of repayment or up to the date on which the outstanding rupee export credit becomes overdue, whichever is earlier.
Specified Sectors
1. Handicraft
2. Carpets
3. Handlooms
4. Small and Medium Enterprises (SMEs)(as defined in Annex II)
5. Readymade Garments
6. Processed Agriculture Products
7. Sport Goods
8. Toys
9. 134 Tariff lines on Engineering Products (Annex I)
(S Karuppasamy)
(Executive Director)
Guest
Notification No : RBI/2012-13/389Published in Others