Dear Members,
Please suggest some rule & regulation regarding free sample of excisable goods within India and outside India. Can we remove these sample with payment of duty or without payment of duty.
Thanks
Ram kr. (Buisness) (883 Points)
17 March 2009Dear Members,
Please suggest some rule & regulation regarding free sample of excisable goods within India and outside India. Can we remove these sample with payment of duty or without payment of duty.
Thanks
Rajesh Kumar
(Advocate- Tax)
(7806 Points)
Replied 18 March 2009
Ram kr.
(Buisness)
(883 Points)
Replied 20 March 2009
Dear Sir,
If the goods are packed in a packing, showing that it is a sample, not for sale, Section 4A is not applicable. it means we can remove these sample without payment of duty either with in India or out side India. Please clerify.
Thanks
Rajesh Kumar
(Advocate- Tax)
(7806 Points)
Replied 20 March 2009
Section 4A is not applicable- means Central Excise duty will not be paid on MRP basis, but under Section 4. Central Excise duty is to be paid. off course, if you clear it for export, you can export without payment of duty under bond, or under claim of rebate after payment of duty.
Yes, sales tax is not payable on samples.
auren
(Manager)
(22 Points)
Replied 02 May 2009
R.Guru
(Accountant)
(30 Points)
Replied 29 December 2010
dear all,
we are manafacturer of cooling towers and installation of our customer site my question our capital goods of crane can we send to our customer site for installation purpose ( erection and commissioning also our scope ) if we can transfer what we do ?
R. guru
U S Sharma
(glidor@gmail.com)
(21056 Points)
Replied 29 December 2010
if the capital goods has been subject to input credit then u have to follow the procedure 4(5)a of cenvat credit rules. under intimatin to your juridictional AC/DC, and to be returned back within 180 days.
-----------------------------------------------------------------------------------------------
4(5) (a) The CENVAT credit shall be allowed even if any inputs or capital goods as such or after being partially processed are sent to a job worker for further processing, testing, repair, re-conditioning, or for the manufacture of intermediate goods necessary for the manufacture of final products or any other purpose, and it is established from the records, challans or memos or any other document produced by the manufacturer or provider of output service taking the CENVAT credit that the goods are received back in the factory within one hundred and eighty days of their being sent to a job worker and if the inputs or the capital goods are not received back within one hundred eighty days, the manufacturer or provider of output service shall pay an amount equivalent to the CENVAT credit attributable to the inputs or capital goods by debiting the CENVAT credit or otherwise, but the manufacturer or provider of output service can take the CENVAT credit again when the inputs or capital goods are received back in his factory or in the premises of the provider of output service
Deviprasad G.K.
(Consultant)
(35 Points)
Replied 30 December 2010
Hi Ram Kr,
SAMPLES
SAMPLES
1. Introduction
1.1 There is no specific provision in Central Excise (No.2) Rules, 2001 (hereinafter referred to as the ‘said Rules’) governing drawl and testing of ‘samples’ of manufactured goods or inputs to ascertain their correct identity or classification or eligibility of any exemption. However, under various procedures, such as relating to exports, assessment etc. drawl of samples is required.
2. Categorization of Samples
2.1 The samples can be categorized, as follows:
(i) Trade samples sent to customers for trial;
(ii) Samples for test purposes;
(iii) Samples for supply against sale contracts or for enforcement of control measures;
(iv) Samples for display at exhibitions, fairs and in show-cases; and
(v) Samples for market inquiries by Central Excise Officers.
2.2 Apart from the assessee requiring the samples for cogent reasons, the Central Excise Department may also require drawl and testing of samples and the assessee shall comply with such directions as may be given in this regard. However, there shall not be any drawl and testing of samples in routine manner.
3. Procedure for the drawl and accounting of Samples
3.1 Trade Samples
3.1.1 The manufacturers’ generally give such samples to their customers for ‘trial and approval’. The removal shall be in the same manner as the removal of goods for home consumption. The manufacturer shall prepare an invoice under rule 11 of the said Rules and record the details in his Daily Stock Account. He shall discharge duty in the manner specified in rule 8 of the said Rules unless the removal of samples are exempted from duty by a notification issued under Section 5A of the Central Excise Act, 1944.
3.1.2 Samples of certain goods sent to the trade by manufacturers are likely to be returned. In such cases, the procedure specified in rule 16 of the said Rules and the instructions relating thereto shall be followed.
3.2 Samples for test purposes
3.2.1 The samples of this category will generally include:-
(i) Samples drawn by in-house laboratory for testing quality and adherence to product specifications;
(ii) Samples drawn for preservation for investigation of complaints;
(iii) Samples drawn for test at other concerns and independent testing agencies;
(iv) Samples required to be sent to Government Test centers including the Chemical Examiners for test.
3.2.2 The assessee is required to maintain a proper account of receipts and the utilisation of samples in the test, in the laboratory. The removal shall be in the same manner as the goods are removed for home consumption. The manufacturer shall prepare invoice under rule 11 the said Rules and make issue entries for the goods (samples) in the Daily Stock Account. Appropriate duty shall be paid by the assessee on these samples before their removal for test purposes unless otherwise exempted by a duty exemption notification.
3.3 Samples for other purposes
3.3.1 Where samples are required for the purposes specified at (iii), (iv) and (v) of paragraph 2.1 above, the procedure specified at paragraph 3.2 shall be followed. However, it is clarified that when a manufacturer preserves the samples of their product for some period for investigation of complaints, if any, no duty should be charged on these samples considering that the goods remain within the factory. Duty shall be charged, unless exempted by a notification, once the samples are cleared from the factory. If at any time the manufacturer desires to destroy these samples, procedure specified in rule 21 of the said Rules shall be followed.
4. Quantity of samples
4.1 Samples should be drawn in reasonable quantity. However, in some cases a specific quantity is asked for which should be supported by requisition order from the Chemical Examiner. An account of all departmental samples drawn and sent to the Chemical Examiner should be maintained by the Range Officer.
5. Test Memo
5.1 A test memo should always be prepared in triplicate, the original to be sent to the Chemical Examiner, triplicate to the Deputy/Assistant Commissioner and duplicate retained on the Range Officer’s record.
6. Preservation of Samples
6.1 The samples drawn by the Range staff but not sent for test to laboratories should be preserved for six months from the date of analytical report on the sample tested. In case of any discrepancy being noticed, the samples have to be preserved till the period of Appeal or Revision application is over or till disposal of Appeal/Revision Application. The remnants, which are not required by the concerned assessee, may be destroyed soon after the parties specially inform that they accept the analytical report furnished by the Chief Chemist or after completion of the period of appeal or revision petition is over, as the case may be.
7. Cost of samples when drawn by the Department
7.1 In respect of samples drawn by the officers of the Central Excise Department for ascertaining the identity of goods/its classification or any other official purposes relating to Central Excise, the cost of samples may be reimbursed on manufacturer’s request out of the contingency by the divisional officer. The cost of the containers required for drawl of samples may not be much and if the same cannot be borne by the assessee through persuasion the same should be borne by the Department.
8. Procedure for testing and re-testing of samples drawn by the Department
8.1 Except where there are special instructions for particular kind of samples, the representative samples from such or any lot must be drawn in quadruplicate in the presence of the owner/manager of the factory or his representatives.
8.2 The quantities of excisable goods or materials taken for testing should be the minimum necessary for testing and the Commissioner will, in consultation with the Chemical Examiner concerned, specify for each kind of excisable goods or materials the size of samples for this purpose.
8.3 The samples should be sealed with Excise seals and a declaration obtained from the owners (manufacturers) to the effect that the samples drawn are representative of the lot. The assessee, if he so desires, may also be permitted to affix his seal on the samples.
8.4 The four samples drawn for test should be clearly marked as:
(a) Original for Chemical Examiner (to be despatched to him along with the declaration and the relative test memorandum under intimation to the Assistant/Deputy Commissioner concerned).
(b) Duplicate to be sent to the Deputy/Assistant Commissioner of Central Excise (to be forwarded to him for safe custody for further use in case a dispute arises).
(c) Triplicate for Range Officer (to be retained for any future reference or to cover loss by post or other emergency).
(d) Quadruplicate to be given to the manufacturer (for his own record).
8.5 Before despatch of sample to the Deputy/Assistant Commissioner of Central Excise and the Chemical Examiner, the samples should be packed properly, sealed and marked in such a way that they suffer no loss or deterioration in transit or subsequent storage.
8.6 The Chemical Examiner after test, will return the remnant sample, if fit for re-test and not in other cases, together with his test report, to the Assistant Commissioner concerned. The Chemical Examiner will be in position to indicate whether or not a remnant is fit for re-test and the Deputy/Assistant Commissioner of Central Excise or other adjudicating authority will in most cases be able to anticipate whether the assessee will demand a re-test or not. The test results should be speedily communicated to the Assessee.
8.7 The Department shall carefully preserve the remnant sample.
8.8 Whenever the assessee is dissatisfied with the test carried out by the Chemical Examiner he can apply to the Deputy/Assistant Commissioner of Central Excise concerned, after payment of the prescribed test fees, for a retest within 90 days from the date on which the test result was communicated to the him.
8.9 Where the remnant sample is available in sufficient quantity in its original state, re-test should ordinarily be on such remnant sample. Where such remnant sample was received from the Chemical Examiner but it is not in sufficient quantity or in original state, or where the party concerned desires, for one or the other reasons, a re-test on duplicate or triplicate sample, Deputy/Assistant Commissioner of Central Excise, the adjudicating authority or, as the case may be, the appellate authority should pass an appropriate order for re-test on duplicate or triplicate sample.
8.10 Where an assessee requests for re-test in a laboratory other than a Control Laboratory (hereinafter in this paragraph referred to as “outside laboratory”) whether on the remnant or the duplicate or triplicate sample, such request may be allowed for testing the sample from an outside Government or Semi-Government laboratory with the prior permission of the Commissioner or the Appellate or the Reversionary authority, as the case may be after Chief Chemist has confirmed that the departmental laboratories do not have the facilities for performing the particular test in question. The request for re-test in outside laboratories will be conditional upon the party concerned meeting the cost of the re-test.
8.11 It is always open to the assessee concerned to get the authenticated sample, in its possession, analysed in any laboratory of his own choice and submit the findings of such laboratory for due consideration on merits of each case, by the appropriate adjudicating/appellate authority. However, the assessee should ensure that the laboratory which analyses the samples indicates clearly in its test report the full particulars of the samples and whether the central excise seals affixed to the samples were intact or not at the time of its receipt by such laboratory.
8.12 The payment of a fee for re-test does not entitle the assessee to a copy of chemical report. The result of any such retest must however be communicated to the owner at the earliest. Where a copy of the test report is to be furnished to the assessee at its request, the Department shall have the option to provide only a concise, edited) form of the Test Report. The editing of the Test Report should be done in consultation with the Chemical Examiner.
8.13 For the purpose of market enquiries regarding the value of excisable goods, samples can be drawn by Central excise Officer on written order of the Deputy/Assistant Commissioner of Central Excise, on returnable basis. There is no need to make any issue entries in Daily Stock Account for such samples as the same are to be returned to the factory. The Range Officer should maintain a simple account showing the date of taking the sample, quantity taken and date of return. There should be proper acknowledgement of drawl and return of sample. The officer who draws sample, will also give acknowledgement to the assessee and take acknowledgement when he returns the sample.
9. Clearance of model/proto-type without payment of duty for trial etc.
9.1 Where a finished excisable goods falling in the category of model/proto-type are to be sent out for trail purposes by actually putting them to effective use after conducting certain test to ensure that they meet with certain standard/specified norm, clearance may be allowed on payment of duty. Their subsequent return to the factory may be regulated in terms of rule 21 of the said Rules.
10. Samples drawn at the time of export of goods
10.1 Three sets of samples are drawn at the time of examination or sealing of export goods. Two sets of samples, duly sealed, are handed over by the Central Excise Officer examining the consignment to the exporter or his authorised agent for delivery to the Custom Officer at the point of export. The Central Excise Officer for his record retains the third set of sample.
10.2 The Customs Officer will check the export goods with the sample before allowing export. The samples shall be dealt with in accordance with instructions/standing orders of the Board or the Commissioner of Customs.
Regards
Prasad G.K
Analysis of 20 GST Notices (including 2 Appeals) and Practise on Drafting(with recording)
GSTR 9 and 9C for FY 23-24 as amended by Notification 12/2024 dated 10th July 2024(with recording)
CAclubindia
